AFR's Dragon 30kW product provides LOE compatible connector for high power fiber lasers up to 30 kW. Technologies incorporated include cladding mode stripping, indirect water cooling, and safety interlock.

AFR's Dragon 20 kW product provides QD compatible connector for high power fiber lasers up to 20 kW.  Technologies incorporated include cladding mode stripping, indirect water cooling, and safety interlock.

AFR's Dragon 15 kW Laser Cable provides QBH compatible connector for high power fiber lasers up to 15 kW. Technologies incorporated include cladding mode stripping, indirect water cooling and safety interlock.

AFR's Dragon 30 kW product provides Q+ compatible connector for high power fiber lasers up to 30 kW. Technologies incorporated include cladding mode stripping, indirect water cooling, and safety interlock.

Motorized Variable Optical Delay Line provides precision optical path length adjustment of up to 500 ps. Driven by a stepping motor and driver has been integrated inside following the RS-232 standard, the MDL has a delay resolution about 0.76 μm (2.5 fs). In addition, its advanced motion design guarantees longevity for long-term continuous operation. Low insertion loss and high reliability make this device ideal for integration in optical coherence tomography (OCT) systems, network equipment and test instruments for precision optical path length control or timing alignment.

AFR's Dragon 3 kW Laser Cable provides QBH compatible connector for high power fiber lasers up to 3 kW. Technologies incorporated include cladding mode stripping, indirect water cooling, protective window and safety interlock.

The (2+1)×1 Multimode Pump and Signal Combiner enables highly efficient combining of the powers from 2 multimode pump diodes and a signal beam from the signal fiber into a double clad output fiber. The Pump & Signal Combiner is also available for different fiber types.

The Special Wavelength Coupler offers very low insertion loss, low polarization dependent loss and excellent environmental stability. Accurate coupling ratios from 0.01/99.99 to 50/50 are available with very good uniformity in the operating wavelength range. These components find extensive applications to perform power splitting and monitoring functions in all kinds of optical communication systems.

The High Power N × 1 Laser Combiner is designed for combining the power from N units of kW class fiber laser with high efficiency. The laser combiner is available for different fiber types.

The High Power Pump & Signal Combiner enables highly efficient combining of the powers from up to 6 multimode pump diodes and a signal laser into a double cladding output fiber. The pump and signal combiner can handle more than 1 kW combined power. Available for different fiber types.

The Cladding Power Stripper (CPS) is designed for efficiently stripping off residual cladding power, ASE and escaped core modes of double cladding fiber while preserving minimal degradation to signal power and beam quality.

The (1+1)×1 Multimode Pump & Signal Combiner enables highly efficient combining of the powers from 1 multimode pump diode and a signal beam from the signal fiber into a double clad output fiber. The Pump & Signal Combiner is also available for different fiber types.

The PM Patchcord series has excellent environmental stability, high return loss, low insertion loss. It is ideal for PM amplifiers, fiber lasers and test instrumentation applications.

The Unidirectional Integrated Tap Photodiode (UTPD) integrates the functionality of an optical coupler and a photodiode for optical network's power detection. The unidirectional feature allows the PD to respond to power from input port only. It can be applied for channel power monitoring in DWDM system, in-line optical network switching protection monitoring (OLP), reconfigurable optical add/drop multiplexers (ROADM), and gain/attenuation monitoring in EDFAs, network's power detection, etc.

Variable Optical Delay Line provides precision optical path variation of more than 15 cm (500 ps). The compact, rugged design makes the device ideal for integration in network equipment, test instruments, and optical for integration in network equipment, test instruments, and optical coherence tomography (OCT) systems for precision optical path length or timing alignment.

AFR's Dragon 6 kW Laser Cable provides QBH compatible connector for high power fiber lasers up to 6 kW. Technologies incorporated include cladding mode stripping, indirect water cooling, protective window and safety interlock.