| Key Features | Applications |
| Low Transmission Loss | Fiber Laser Output Connector |
| High Power Handling | High Power Laser Coupling Cable |
| High Backward Power Handling | |
| Indirect Water Cooling | |
| Safety Interlock |
| Optical Parameter | Unit | Value |
| Operation Wavelength | nm | 1940 |
| Max. Transmission Loss of Fiber Core* | % | 2 |
| Surface Quality of EndCap(Effective Aperture: > 90%) | / | φ ≤1.6 mm, MIL0 - 0 φ > 1.6 mm, MIL10 - 5 |
| Max. Power Handling* | W | 600 |
| Min.Cladding Power Stripping Efficiency* | % | 85 |
| Backward Power Handling* | W | 500 |
| Max. Z-Position Tolerance | μm | 80 |
| Max. Angular Deviation | mrad | 20 |
| Cooling Water Requirements | ||
| Flow Rate | L/min | 1.5 - 3.0 |
| Max. Water Pressure | Mpa | 0.8 |
| Water Temperature | °C | 10 - 45 |
| Water Hose Diameter | mm | ID/OD = 4/6 |
| Others | ||
| Mechanical Interface | - | Compatible with the Standard QBH Interface |
| Type of Cable Gland | - | Metal |
| Max. Fiber Tensile Load* | N | 5 |
| Max. Cable Tensile Load* | N | 50 |
| Storage Temperature | °C | - 20 to + 70 |
| Operating Temperature | °C | + 5 to + 50 |
| Short Term (4h) Bend Radius² | cm | ≥ 10 |
| Long Term Bend Radius² | cm | ≥ 15 |
1Surface Quality is inspected under 20X microscope
2For Fiber Cladding Diameter ≤400um2For Fiber Cladding Diameter ≤400um
*Refer to Qualification Test Report or assuranced by design
